System And Components
204-0330 WIRING GP-ENGINEFOR USE WITH NON-CSA ENGINES WITH EIS, EMCP II AND 70 PIN CONNECTOR WIRING SYSTEM
Group No: 204-0330
| Part Number | Part Name | Qty | |
|---|---|---|---|
| 5P6024 | 1 WIRE (0.8-M) | ||
| 4P8134 | 2 CLIP (LADDER) | 19 | |
| 9X6772 | 3 STRAP-CABLE | 25 | |
| 1A9579 | 4 BOLT (5/16-18X1.5-IN) | 5 | |
| 5P4116 | 5 WASHER-HARD (8.8X20.5X2-MM THK) | 7 | |
| 0T0102 | 6 BOLT (3/8-16X0.625-IN) | 1 | |
| 5M2894 | 7 WASHER-HARD (10.2X18.5X2.5-MM THK) | 3 | |
| 4P7581 | 8 CLIP (LADDER) | 3 | |
| 8S8158 | 9 SEAL-WIRE | 7 | |
| 1C0569 | 10 BOLT (5/16-18X0.5-IN) | 2 | |
| 1958021 | 11 HARNESS AS-ENGINE | 1 | |
| 1030213 | RECEPTACLE AS-CONNECTOR (70-PIN) | 1 | |
| 1089656 | STRAP-CABLE | 1 | |
| 1123237 | CONNECTOR | 1 | |
| 5P6009 | TUBE-HEAT SHRINK (9.52-MM DIA)(1.2-M) | ||
| 3S2093 | STRAP-CABLE | 1 | |
| 7R3029 | CAP-DUST | 1 | |
| 7T3272 | RECEPTACLE-CONNECTOR (6-PIN) | 1 | |
| 8T6342 | TUBE-HEAT SHRINK (3.2-MM DIA)(350-CM) | ||
| 8T8732 | RECEPTACLE-CONNECTOR (3-PIN) | 2 | |
| 8T9605 | PLUG AS-CONNECTOR (6-PIN) | 4 | |
| 9X0482 | PLUG AS-CONNECTOR (3-PIN) | 2 | |
| 9X6772 | STRAP-CABLE | 1 | |
| 2L8052 | TERMINAL-RING (6-GA, 3/8-IN SCREW) | 1 | |
| 2L8060 | TERMINAL-RING (8-GA, 3/8-IN SCREW) | 1 | |
| 1654893 | BOOT (70-PIN) | 1 | |
| 8T8729 | PIN-CONNECTOR (16-GA TO 20-GA) | 22 | |
| 5M2894 | 12 WASHER-HARD (10.2X18.5X2.5-MM THK) | 1 | |
| 9X3495 | 13 CLIP AS | 1 | |
| 9X8486 | 14 SCREW-MACHINE (8-32X0.75-IN) | 4 | |
| 1046202 | 15 CLIP (LADDER) | 1 | |
| 0S1594 | 16 BOLT (3/8-16X1-IN) | 1 | |
| 4B4863 | 17 WASHER (4.7X11X1.2-MM THK) | 8 | |
| 4B2043 | 18 NUT (8-32-THD) | 4 | |
| 1957988 | 19 GASKET | 1 | |
| 0T0573 | 20 BOLT (3/8-16X2.75-IN) | 1 |