System And Components
201-8413 WIRING GP-ENGINES/N CRD512-UP
Group No: 201-8413 · Commonality
| Part Number | Part Name | Qty | |
|---|---|---|---|
| 3S2093 | 1 STRAP-CABLE | 4 | |
| 5D2651 | 2 CLIP | 1 | |
| 7K1181 | 3 STRAP-CABLE | 7 | |
| 9X3495 | 4 CLIP AS | 1 | |
| 1022240 | 5 SENSOR GP-TEMPERATURE (3-PIN)(HYDRAULIC OIL) | 1 | |
| 1743016 | 6 PLUG AS-RESISTOR (3-PIN, 120 OHM) | 1 | |
| 2123413 | 7 BRACKET AS | 1 | |
| 2153860 | 8 BRACKET AS | 1 | |
| 2284982 | 9 RESISTOR AS | 1 | |
| 1186878 | 10 BRACKET AS | 1 | |
| 1305300 | 11 CLIP | 3 | |
| 1310427 | 12 SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | 1 | |
| 1470856 | 13 RESISTOR AS | 1 | |
| 3E3365 | WEDGE-RECEPTACLE LOCK (2-PIN) | 1 | |
| 1028802 | KIT-RECEPTACLE (2-PIN) | 1 | |
| 8T6885 | TUBE-HEAT SHRINK (19.05-MM DIA)(5-CM) | ||
| 1863735 | PIN-CONNECTOR (16-GA TO 18-GA) | 2 | |
| 1566175 | 14 CLIP (LADDER) | 2 | |
| 1893158 | 15 SUPPRESSOR-ARC | 1 | |
| 1K3113 | 16 SPACER (0.546X0.840X3.875-IN THK) | 1 | |
| 1S1015 | 17 CLIP (LOOP) | 2 | |
| 2780466 | 18 HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | 1 | |
| 1028802 | KIT-RECEPTACLE (2-PIN) | 3 | |
| 1028803 | KIT-RECEPTACLE (3-PIN) | 1 | |
| 1106845 | PLUG AS-CONNECTOR (40-PIN) | 1 | |
| 3S2093 | STRAP-CABLE | 4 | |
| 3T0203 | PLUG AS-CONNECTOR (20-PIN) | 1 | |
| 7K1181 | STRAP-CABLE | 1 | |
| 8N1535 | BELL AS-END | 1 | |
| 9X6772 | STRAP-CABLE | 1 | |
| 1275483 | PLUG AS-CONNECTOR (1-PIN) | 1 | |
| 1275484 | RECEPTACLE AS-CONNECTOR (1-PIN) | 1 | |
| 1275486 | RECEPTACLE AS-CONNECTOR (1-PIN) | 1 | |
| 1552260 | KIT-CONNECTING PLUG (3-PIN) | 1 | |
| 1552270 | KIT-CONNECTING PLUG (2-PIN) | 8 | |
| 1607689 | PLUG AS-CONNECTOR (70-PIN) | 1 | |
| 3J1907 | 19 SEAL-O-RING | 1 | |
| 3K0360 | 20 SEAL-O-RING | 1 | |
| 3V4791 | 21 GROMMET | 1 | |
| 4D9517 | 22 CLIP | 1 | |
| 5C7261 | 23 NUT (M8X1.25-THD) | 4 | |
| 5P4116 | 24 WASHER-HARD (8.8X20.5X2-MM THK) | 7 | |
| 5P9297 | 25 CLIP (LOOP) | 1 | |
| 6D4244 | 26 CLIP (LOOP) | 1 | |
| 6D4246 | 27 CLIP (LOOP) | 5 | |
| 6D4636 | 28 CLIP (LOOP) | 1 | |
| 6V8225 | 29 NUT (M6X1-THD) | 2 | |
| 7X2552 | 30 BOLT (M16X2X30-MM) | 1 | |
| 7X7729 | 31 WASHER (11X25X3-MM THK) | 1 | |
| 8M2773 | 32 CLIP (LOOP) | 1 | |
| 8T4121 | 33 WASHER-HARD (11X21X2.5-MM THK) | 6 | |
| 8T4136 | 34 BOLT (M10X1.5X25-MM) | 4 | |
| 8T4137 | 35 BOLT (M10X1.5X20-MM) | 3 | |
| 8T4200 | 36 BOLT (M8X1.25X16-MM) | 1 | |
| 8T4223 | 37 WASHER-HARD (13.5X25.5X3-MM THK) | 1 | |
| 8T5041 | 38 BOLT (M12X1.75X120-MM) | 1 | |
| 9X8250 | 39 CLIP (LOOP) | 2 | |
| 9X8256 | 40 WASHER (6.6X12X2-MM THK) | 2 | |
| 9X8257 | 41 WASHER (17.5X30X3.5-MM THK) | 1 |