System And Components
124-5776 STARTING MOTOR GP-AIRREQUIRES AIR SUPPLY SYSTEM CAPABLE OF 620 KPA MIN TO 1034 KPA MAX PRESSURE, 1L-5011 REQUIRED WHEN USED WITH SUPPLY SYSTEMS PRODUCING MORE THAN 1034 KPA AIR PRESSURE
Group No: 124-5776
| Part Number | Part Name | Qty | |
|---|---|---|---|
| 1055081 | 1 STARTING MOTOR GP-AIR | 1 | |
| 3B7257 | 2 BUSHING-REDUCER | 1 | |
| 3B6555 | 3 ELBOW (1 IN) | 2 | |
| 9L4652 | 4 HOSE AS | 1 | |
| 4B7770 | 5 TEE | 1 | |
| 4D3967 | 6 BUSHING-REDUCER | 1 | |
| 6V1813 | 7 FITTING | 1 | |
| 4N3410 | 8 VALVE AS-CONTROL (STARTING) | 1 | |
| 2W0629 | KNOB-ENGINE START | 1 | |
| 6B8129 | 9 NIPPLE-PIPE | 2 | |
| 3P6048 | 10 HOSE AS | 1 | |
| 8T9107 | 11 TEE (96.5CM) | 1 | |
| 3J1907 | 12 SEAL-O-RING (11.89MM ID) | 3 | |
| 2P1314 | 13 CONNECTOR | 1 | |
| 6D3479 | 14 CLIP (14.29MM ID) | 1 | |
| 1189142 | 15 BRACKET | 1 | |
| 4H7869 | 16 GASKET | 1 | |
| 8S2332 | 17 BOLT-12 POINT HEAD (5/8-11X1.75-IN) | 2 | |
| 7J8902 | 18 BOLT-12 POINT HEAD (5/8-11X1.5-IN) | 1 | |
| 2S5658 | 19 WASHER-HARD (17X29X3-MM THK) | 1 | |
| 9S5828 | 20 U-BOLT (1/4-20-THD) | 1 | |
| 9S8750 | 21 NUT-FULL (1/4-20-THD) | 2 | |
| 5P0537 | 22 WASHER-HARD (7.2X14.5X2-MM THK) | 2 | |
| 6N3899 | 23 SPACER | 1 | |
| 7M9544 | 24 VALVE (AIR STARTING MOTOR) | 1 | |
| 6B8128 | 25 NIPPLE-PIPE | 1 | |
| 1L2279 | 26 ELBOW (3/8 IN) | 1 | |
| 1417106 | 27 LUBRICATOR GP-AIR MOTOR | 1 | |
| 6K1972 | 28 ELBOW-FLARED (1/4 NPT) | 1 | |
| 3B6498 | 29 ELBOW (1 IN) | 1 | |
| 5P4479 | 30 ELBOW (FLARED-LONG)(90 DEGREES) | 1 | |
| 5J7303 | 31 ELBOW (FLARED) | 2 | |
| 4W4536 | 32 HOSE AS | 1 | |
| 7V1037 | 33 HOSE AS | 1 | |
| 7X0902 | 34 CONNECTOR (9/16-18 STR THD) | 1 |