Families

▶ARTICULATED DUMP TRUCK

▶ASPHALT PAVER

▶BACKHOE LOADER

▶CHALLENGER

▶COLD PLANER

▶COMBINE

▶CONTROL, GUIDANCE, MONITORING, AND TECHNOLOGY PRODUCTS

▶DRILL

▶EARTHMOVING COMPACTOR

▶ENGINE - GENERATOR SET

▶ENGINE - INDUSTRIAL

▶ENGINE - MACHINE

▶ENGINE - TRUCK

▶ENGINEER SUPPORT TRACTOR

▶EXCAVATOR

▶EXPANDED MINING PRODUCTS

▶FOREST PRODUCTS

▶GENERATOR

▶INTEGRATED TOOLCARRIER

▶LOAD, HAUL, DUMP

▶MARINE PRODUCTS

▶MATERIAL HANDLER

▶MINI HYDRAULIC EXCAVATOR

▶MOTOR GRADER

▶OEM SOLUTIONS

▶OFF-HIGHWAY TRUCK

▶ON HIGHWAY TRUCK

▶PAVING COMPACTOR

▶PETROLEUM PRODUCTS

▶PIPELAYER

▶POWER SYSTEMS

▶RENEWABLE ENERGY

▶RETROFIT AFTERTREATMENT

▶ROAD RECLAIMER

▶SKID STEER LOADER

▶TECHNOLOGY

▶TELEHANDLER

▶TILLAGE

▶TRACK-TYPE LOADER

▶TRACK-TYPE SKIDDER

▶TRACK-TYPE TRACTOR

▶UNDERGROUND ARTICULATED TRUCK

▶UTILITY VEHICLE

▶WHEEL DOZER

▶WHEEL TRACTOR-SCRAPER

▶WHEEL-TYPE LOADER

▶WHEEL-TYPE SKIDDER

▶WHEELED EXCAVATOR

▶WORK TOOL

KIT-REBUILD

216 assemblies

M0066160 (2)

243-6718 KIT-CRANKSHAFT BEARING S/N CM81-UP OPTIONAL SERVICE REPAIR AND INCLUDES STANDARD MAIN AND THRUST BEARINGS PART OF 366-6114 CRANKSHAFT GP

368-1372 KIT-VOLTAGE REGULATOR S/N G6B1-UP PART OF 322-8926, 323-6296 GENERATOR GP FOR USE WITH GS562-, GS338-, GS282-, GS281-, GS279-, GS189-, N1D1-UP, EKW1-UP, C5E1-UP, C5H1-UP, C9E1-UP, B8D1-UP, REHS3668

M0068044 (1)

525-1867 KIT-SERVICE S/N H6C1-UP PART OF 525-1865 MOTOR GP-ELECTRIC

M0068376 (2)

326-1006 KIT-FUEL TRANSFER PUMP S/N S9Z1-UP PART OF 476-8769 PUMP GP-UNIT INJECTOR HYD ALSO AN ATTACHMENT

540-6563 KIT-SWITCH S/N XP71-UP PART OF 477-4550, 479-7831 BATTERY GP AN ATTACHMENT

M0068474 (8)

495-1630 KIT-ENGINE GASKET S/N K3B606-UP CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET FIELD INSTALLATION

525-1413 KIT-ENGINE GASKET S/N K3B606-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALLA CYLINDER HEAD. INCLUDES TURBO GASKETS, DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD.

364-0171 KIT-BELLOWS S/N X3F1-UP FIELD INSTALLATION

495-2741 KIT-EXHAUST -CEM S/N X3F1-UP AN ATTACHMENT

504-5930 KIT-INSULATION S/N X3F1-UP AN ATTACHMENT

332-8866 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N BGK1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH NON-3508 BASED ENGINE APPLICATIONS

333-2392 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N BGK1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH G3304, G3306, G3406, G3408, G3408C, G3412, G3412C, G3508, G3512, AND G3516 ENGINES

333-2393 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N BGK1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH 3508 AND 3508B ENGINE APPLICATIONS

M0112169 (2)

373-1057 KIT-GENERATOR REPAIR S/N 2SN1-UP; 9CN1-UP; AAR1-UP FOR USE WITH 822-FRAME, 824-FRAME, 825-FRAME, 826-FRAME, 827-FRAME, 828-FRAME AN ATTACHMENT

171-6719 KIT-PARTS -GENERATOR S/N 2SN1-UP; 9CN1-UP; AAR1-UP FIELD INSTALLATION

SEBP4371 (12)

446-5667 KIT-ENGINE GASKET S/N SBK1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES THE TURBO MOUNTING HARDWARE. FIELD INSTALLATION

465-8892 KIT-ENGINE GASKET -REAR COVER S/N SBK1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FIELD INSTALLATION

519-4471 KIT-WATER PUMP GASKET S/N SBK1-UP WATER PUMP FIELD INSTALLATION

422-3734 KIT-CIRCUIT BREAKER S/N SBK1-UP REWORK KIT FOR USE WITH 3-POLE MASTERPACT BREAKER FIELD INSTALLATION

422-3735 KIT-CIRCUIT BREAKER S/N SBK1-UP REWORK KIT FOR USE WITH 4/6-POLE MASTERPACT BREAKER FIELD INSTALLATION

284-3546 KIT-ELECTRICAL REPAIR S/N G8A1-UP; G8B1-UP; G8C1-UP; G8D1-UP FOR USE WITH 3000-FRAME, SR5 GENERATOR AN ATTACHMENT

475-0266 KIT-ELECTRICAL REPAIR S/N G8A1-UP; G8B1-UP; G8C1-UP; G8D1-UP; G9E1-UP PROVIDES KIT FOR RETAINING AND REPAIRING OF LEAD CABLES. KIT INCLUDES SILICON RTV, INSULATING TAPE, AND HEAT SHRINK FOR USE WITH 3010, 3020, 3044, 3045, 3066, 3068 FRAME HIGH VOLTAGE FORM WOUND GENERATORS, 3044, 3045, 306

449-3365 KIT-WIRING -RECTIFIER S/N G8A1-UP; G8B1-UP; G8C1-UP; G8D1-UP; G9E1-UP; G7Y1-UP KIT SERVICED ONLY AS A COMPLETE PACKAGE PART OF 318-0028 RECTIFIER GP-REVOLVING FIELD REPLACEMENT FOR 318-0028 FOR USE WITH 3010 FRAME GENERATORS, 3020 FRAME GENERATORS, 3042 FRAME GENERATORS, 3044 FRAME GENERATO

373-1057 KIT-GENERATOR REPAIR S/N G6A1-UP; G6C1-UP; G5Z1-UP FOR USE WITH 822-FRAME, 824-FRAME, 825-FRAME, 826-FRAME, 827-FRAME, 828-FRAME AN ATTACHMENT

339-7759 KIT-MARINE GENERATOR PARTS S/N G6C1-UP AN ATTACHMENT

384-0499 KIT-ENGINE PARTS -EXHAUST S/N SBK1-UP FOR USE WITH BELLOWS ASSEMBLY CONNECTING ELBOW EXHAUST TO TURBOCHARGER FIELD INSTALLATION

430-5832 KIT-GASKET S/N SBK1-UP KIT CONTAINS GASKETS AND SEALS TO INSTALL THE AFTERCOOLER AND ATTACHING LINES. FIELD INSTALLATION

SEBP4796 (52)

243-6718 KIT-CRANKSHAFT BEARING S/N JHL1-UP; GPT1-UP PART OF 366-6114 CRANKSHAFT GP

592-7339 KIT-CYLINDER HEAD GASKET S/N JHL1-UP FIELD INSTALLATION

592-7354 KIT-CYLINDER HEAD GASKET S/N JHL1-UP; GPT1-UP PART OF 455-1184, 455-1191 KIT-ENGINE OVERHAUL ALSO FIELD INSTALLATION

417-9667 KIT-ENGINE GASKET -REAR STRUCTURE S/N GPT1-UP CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET PART OF 455-7245 KIT-ENGINE OVERHAUL

450-5583 KIT-ENGINE GASKET S/N JHL1-UP; GPT1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET. PART OF 455-1184 KIT-ENGINE OVERHAUL FOR USE WITH 328-4538, 328-4539, 342-6531, 342-6535, 342-6536, 342-6539, 342-6543 ALSO FIELD INST

453-2313 KIT-ENGINE GASKET -HEAT EXCHANGER S/N JHL1-UP; GPT1-UP CONTAINS SEALS TO INSTALL THE HEAT EXCHANGER PART OF 455-1184, 455-1191, 455-7245, 455-7248 KIT-ENGINE OVERHAUL FOR USE WITH 328-4538, 328-4539, 342-6531, 342-6535, 342-6536, 342-6539, 342-6543, PA7766 & PA7765, PA7766, PQ0166, PQ0187,

453-2315 KIT-ENGINE GASKET S/N GPT1-UP KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES. PART OF 455-7245, 455-7248 KIT-ENGINE OVERHAUL

455-1617 KIT-ENGINE GASKET -AFTERCOOLER, LINES S/N JHL1-UP; GPT1-UP CONTAINS THE GASKETS & SEALS TO INSTALL THE AFTERCOOLER & ATTACHING LINES PART OF 455-1184, 455-1191, 455-7245, 455-7248 KIT-ENGINE OVERHAUL FOR USE WITH 342-6531, 342-6535, 342-6536, 342-6543, 328-4538, 328-4539, 342-6531, 342-6539

455-1850 KIT-ENGINE GASKET S/N JHL1-UP; GPT1-UP KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES. PART OF 455-1184, 455-1191 KIT-ENGINE OVERHAUL FOR USE WITH 328-4538, 328-4539, 342-6531, 342-6535, 342-6536, 342-6539, 342-6543 ALSO FIELD

455-1871 KIT-ENGINE GASKET S/N JHL1-UP; GPT1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS. PART OF 455-1184, 455-7245 KIT-ENGINE OVERHAUL FOR USE WITH 328-4538, 328-4539, 342-6531, 342-6535, 342-6536, 342-6539, 342-6543 ALSO FIELD I

455-9998 KIT-ENGINE GASKET S/N JHL1-UP +==KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. +==KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. +== KIT INCLUDES TURBO GASKETS.. +==FOR IN-LINE 4 AND 6 CYLINDER ENGINES W

456-0006 KIT-ENGINE GASKET S/N GPT1-UP KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEAL. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYL

491-7418 KIT-ENGINE GASKET S/N GPT1-UP CENTRAL AND LOWER STRUCTURE GASKET KIT FOR USE WITH 369-7553 FIELD INSTALLATION

491-7457 KIT-ENGINE GASKET S/N GPT1-UP OIL COOLER AND LINES GASKET KIT FOR USE WITH 369-7553 FIELD INSTALLATION

491-7463 KIT-ENGINE GASKET S/N GPT1-UP KITCONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE FOR USE WITH 369-7553 FIELD INSTALLATION

556-4299 KIT-ENGINE GASKET S/N GPT1-UP SINGLE CYLINDER HEAD FOR USE WITH 342-6535 FIELD INSTALLATION

564-1682 KIT-ENGINE GASKET S/N JHL1-UP SINGLE CYLINDER HEAD FIELD INSTALLATION

571-8524 KIT-ENGINE GASKET S/N GPT1-UP TURBOCHARGER FOR USE WITH 451-7340 FIELD INSTALLATION

572-3105 KIT-ENGINE GASKET S/N GPT1-UP SINGLE CYLINDER HEAD GASKET KIT FOR USE WITH 451-7340 FIELD INSTALLATION

455-1184 KIT-ENGINE OVERHAUL -MAJOR REPAIR S/N JHL1-UP; GPT1-UP FOR USE WITH 328-4538, 328-4539, 342-6531, 342-6535, 342-6536, 342-6539, 342-6543, REHS9298, MARINE ENGINE, LA5283 & LA5287, LA5291 & LA5295, LA5281 & LA5285, LA5289 & LA5293, LA5290 & LA5294, LA5297 & LA5301, LA5312 & LA5314 ALSO FIELD

455-1191 KIT-ENGINE OVERHAUL -TOP END S/N JHL1-UP; GPT1-UP FOR USE WITH 328-4538, 328-4539, 342-6531, 342-6535, 342-6536, 342-6539, 342-6543, REHS9289, MARINE ENGINE, LA5283 & LA5287, LA5291 & LA5295, LA5281 & LA5285, LA5289 & LA5293, LA5290 & LA5294, LA5297 & LA5301, LA5312 & LA5314 ALSO FIELD INST

455-7245 KIT-ENGINE OVERHAUL -MAJOR REPAIR S/N GPT1-UP FOR USE WITH 328-4549, REHS9293, MARINE ENGINE, PA7766, PA7766, PQ0187

455-7248 KIT-ENGINE OVERHAUL -TOP END S/N GPT1-UP FOR USE WITH 328-4549, REHS9284, MARINE ENGINE, PA7766, PA7766, PQ0187

449-8559 KIT-FRONT COVER GASKET S/N JHL1-UP KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALLTHE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 369-7553 FIELD INSTALLATION

362-3114 KIT-WATER PUMP S/N JHL1-UP FIELD INSTALLATION

447-5412 KIT-WATER PUMP S/N JHL1-UP AN ATTACHMENT

447-5414 KIT-WATER PUMP S/N JHL1-UP EXPORT BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY & EXTERNALLY ATTACHED PACKING LIST AN ATTACHMENT

447-5469 KIT-WATER PUMP S/N JHL1-UP EXPORT BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY & EXTERNALLY ATTACHED PACKING LIST AN ATTACHMENT

448-4456 KIT-WATER PUMP S/N JHL1-UP FOR USE WITH C18 TIER II SCAC COMMERCIAL ENGINES, C18 TIER II SCAC AUX MARINE ENGINES, C18 TIER III COMMERCIAL MARINE ENGINES, C18 TIER III SCAC AUX MARINE ENGINES, C18 TIER II SCAC GENSET ENGINES, C18 TIER III SCAC GENSET ENGINES AN ATTACHMENT

448-4451 KIT-FUEL TRANSFER PUMP S/N JHL1-UP FOR USE WITH C18 T2 COMMERICAL MARINE ENGINES, C18 T2 PLEASURES MARINE ENGINES, C18 T2 AUX MARINE ENGINES, C18 SWAC PLEASURE CRAFT MARINE ENGINES, C18 SCAC GENSET ENGINES AN ATTACHMENT

448-4452 KIT-FUEL TRANSFER PUMP S/N JHL1-UP FOR USE WITH C18 SCAC COMMERCIAL ENGINES, C18 SCAC AUX MARINE ENGINES, C18 TIER 3 COMMERCIAL ENGINES, C18 SWAC AUX MARINE ENGINE, C18 SCAC GENSET ENGINES AN ATTACHMENT

248-1394 KIT-INJECTOR S/N JHL1-UP FOR USE WITH PQ0863 FIELD INSTALLATION

4P-1782 KIT-BUS BAR S/N 8HG1-UP; 5NJ1-UP PROVIDES CONNECTION POINT FOR POWER LEADS COMING OUT OF STATOR AS PART OF 109-1595, 109-1596, 109-1597, 109-1601, 109-1602, 109-1603, 312-0149, 312-0153, 312-0155, 314-4165, 344-2719, 9Y-0385, 9Y-0392, 9Y-1430 GENERATOR GP ALSO AN ATTACHMENT

4P-1799 KIT-BUS BAR S/N 8HG1-UP; 4SJ1-UP; 5NJ1-UP; JHL1-UP PROVIDES DUAL VOLTAGE BUS BAR AS. PART OF 312-0157, 314-4169, 340-5960, 342-0543, 342-0547, 342-0549, 344-2709, 344-2711, 344-2713, 344-2715, 9Y-0382, 9Y-0384, 9Y-0389, 9Y-0391, 9Y-1427, 9Y-1429 GENERATOR GP ALSO AN ATTACHMENT

4P-1788 KIT-SPACE HEATER -GENERATOR S/N 8HG1-UP; 4SJ1-UP; 5NJ1-UP; JHL1-UP PART OF 109-1597, 109-1603, 312-0153, 312-0155, 312-0157, 314-4169, 340-5960, 342-0543, 342-0547, 342-0549, 344-2709, 344-2711, 344-2713, 344-2715, 344-2719, 9Y-1427, 9Y-1429, 9Y-1430 GENERATOR GP FOR USE WITH 590 SQUARE LAMI

308-1508 KIT-CONTROL PANEL INSTALLATION S/N JHL1-UP ABOVE DASH AN ATTACHMENT

332-8866 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N 4SJ1-UP; 5NJ1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH NON-3508 BASED ENGINE APPLICATIONS

333-2392 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N 4SJ1-UP; 5NJ1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH G3304, G3306, G3406, G3408, G3408C, G3412, G3412C, G3508, G3512, AND G3516 ENGINES

333-2393 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N 4SJ1-UP; 5NJ1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH 3508 AND 3508B ENGINE APPLICATIONS

7E-5034 KIT-RFI FILTER S/N 8HG1-UP; 4SJ1-UP; 5NJ650-UP 240-VOLT FOR USE WITH VR3 REGULATOR AN ATTACHMENT

348-3295 KIT-GASKET -SINGLE CYLINDER LINER S/N JHL1-UP FOR USE WITH 369-7553 FIELD INSTALLATION

358-0837 KIT-GASKET S/N JHL1-UP KIT CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES. FOR USE WITH 369-7553 FIELD INSTALLATION

360-7476 KIT-GASKET S/N JHL1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS FOR USE WITH E791- ENGINE S/N CYN1-UP, GEN1-UP, E793- ENGINE S/N C1J1-UP, WKB1-UP, E925- ENGINE S/N J2K1-UP, T2P1-UP, E936- ENGINE S/N GES1-UP, KJT1-UP, GS297- EN

360-7477 KIT-GASKET S/N JHL1-UP CONTAINS GASKETS, SEALS, AND BEANDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET. FOR USE WITH E791- ENGINE S/N CYN1-UP, GEN1-UP, E793- ENGINE S/N C1J1-UP, WKB1-UP, E925- ENGINE S/N J2K1-UP, T2P1-UP, E936- ENGINE S/N GES1-UP, KJT

360-7479 KIT-GASKET S/N JHL1-UP CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET. FOR USE WITH E791- ENGINE S/N CYN1-UP, GEN1-UP, E793- ENGINE S/N C1J1-UP, WKB1-UP, E925- ENGINE S/N J2K1-UP, T2P1-UP, E936- ENGINE S/N GES1-UP, KJT1-UP, G

360-7480 KIT-GASKET S/N JHL1-UP ++-CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. ++- KIT INCLUDES THE TURBO GASKETS. ++- BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. ++- FOR IN-LINE 4 AND 6 CYLINDER ENGINES

360-7481 KIT-GASKET S/N JHL1-UP CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBO AND ATTACHING LINES. TURBO MOUNTING HARDWARE. BOLTS, NUTS, STUDS, WASHERS, SPACER. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP FOR USE WITH E791- ENGINE S/N CYN1-UP, GEN1-UP, E793- ENGINE S/N C1J1-UP, WKB1-UP, E925-

386-3814 KIT-GASKET -WATER PUMP S/N JHL1-UP CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAG FIELD INSTALLATION

491-7464 KIT-GASKET S/N JHL1-UP THERE ARE GASKETS, SEALS, & BENDABLE LOCK INSIDE TO REBUILD AND REINSTALL A CYLINDER HEAD. HAS TURBO GASKETS. DOES NOT HAVE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT IF NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD.. TURBO MOUNTIN

4P-3317 KIT-INSTALLATION -EXCITER S/N 8HG1-UP; 4SJ1-UP; 5NJ1-UP CONTAINS STEPPED KEY AND KEY FIELD INSTALLATION

161-0080 KIT-PARTS S/N 4SJ1-UP FOR USE WITH MARINE GENSETS THAT MEET MARINE CLASS SOCIETY REQUIREMENTS AN ATTACHMENT

161-0082 KIT-PARTS S/N 5NJ1-UP AN ATTACHMENT

SEBP4797 (22)

243-6718 KIT-CRANKSHAFT BEARING S/N DSE1-UP PART OF 366-6114 CRANKSHAFT GP

592-7339 KIT-CYLINDER HEAD GASKET S/N DTP1-UP FIELD INSTALLATION

491-7418 KIT-ENGINE GASKET S/N DSE1-UP CENTRAL AND LOWER STRUCTURE GASKET KIT FIELD INSTALLATION

491-7457 KIT-ENGINE GASKET S/N DSE1-UP OIL COOLER AND LINES GASKET KIT FIELD INSTALLATION

491-7463 KIT-ENGINE GASKET S/N DSE1-UP KITCONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE FIELD INSTALLATION

523-5213 KIT-ENGINE GASKET S/N DSE1-UP FRONT STRUCTURE FIELD INSTALLATION

564-1682 KIT-ENGINE GASKET S/N DTP1-UP SINGLE CYLINDER HEAD FOR USE WITH 377-0787 FIELD INSTALLATION

571-8524 KIT-ENGINE GASKET S/N DSE1-UP TURBOCHARGER FOR USE WITH 451-7340 FIELD INSTALLATION

572-3105 KIT-ENGINE GASKET S/N DSE1-UP SINGLE CYLINDER HEAD GASKET KIT FOR USE WITH 451-7340 FIELD INSTALLATION

449-8559 KIT-FRONT COVER GASKET S/N DTP1-UP KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALLTHE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 377-0788 FIELD INSTALLATION

447-5412 KIT-WATER PUMP S/N DSE1-UP AN ATTACHMENT

447-5414 KIT-WATER PUMP S/N DSE1-UP EXPORT BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY & EXTERNALLY ATTACHED PACKING LIST AN ATTACHMENT

447-5469 KIT-WATER PUMP S/N DTP1-UP EXPORT BOXED TO ENSURE PROTECTION AGAINST A MARINE ENVIRONMENT FOR A MINIMUM OF TWO YEARS WITHOUT DETERIORATION. AND CONTENTS IDENTIFIED BY AN INTERNALLY & EXTERNALLY ATTACHED PACKING LIST AN ATTACHMENT

448-4456 KIT-WATER PUMP S/N DTP1-UP FOR USE WITH C18 TIER II SCAC COMMERCIAL ENGINES, C18 TIER II SCAC AUX MARINE ENGINES, C18 TIER III COMMERCIAL MARINE ENGINES, C18 TIER III SCAC AUX MARINE ENGINES, C18 TIER II SCAC GENSET ENGINES, C18 TIER III SCAC GENSET ENGINES AN ATTACHMENT

448-4452 KIT-FUEL TRANSFER PUMP S/N DTP1-UP FOR USE WITH C18 SCAC COMMERCIAL ENGINES, C18 SCAC AUX MARINE ENGINES, C18 TIER 3 COMMERCIAL ENGINES, C18 SWAC AUX MARINE ENGINE, C18 SCAC GENSET ENGINES AN ATTACHMENT

248-1394 KIT-INJECTOR S/N DTP1-UP FOR USE WITH PQ0863 FIELD INSTALLATION

4P-1799 KIT-BUS BAR S/N DTP1-UP PROVIDES DUAL VOLTAGE BUS BAR AS. PART OF 342-0543, 342-0549, 344-2709, 344-2711, 344-2713 GENERATOR GP AN ATTACHMENT

4P-1788 KIT-SPACE HEATER S/N DTP1-UP PART OF 342-0543, 342-0549, 344-2709, 344-2711, 344-2713 GENERATOR GP FOR USE WITH 590 SQUARE LAMINATION SR4B GENERATOR AN ATTACHMENT

348-3295 KIT-GASKET -SINGLE CYLINDER LINER S/N DTP1-UP FOR USE WITH 377-0788 FIELD INSTALLATION

358-0837 KIT-GASKET S/N DTP1-UP KIT CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES. FOR USE WITH 377-0788 FIELD INSTALLATION

386-3814 KIT-GASKET -WATER PUMP S/N DTP1-UP CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAG FIELD INSTALLATION

491-7464 KIT-GASKET S/N DTP1-UP THERE ARE GASKETS, SEALS, & BENDABLE LOCK INSIDE TO REBUILD AND REINSTALL A CYLINDER HEAD. HAS TURBO GASKETS. DOES NOT HAVE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT IF NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD.. TURBO MOUNTIN

SEBP5586 (1)

462-9022 KIT-SENSOR & MOUNTING S/N E7B1-UP PART OF 356-1103 SENSOR GP-ENGINE

SEBP6126 (1)

4P-3317 KIT-INSTALLATION -EXCITER S/N AFR1-UP CONTAINS STEPPED KEY AND KEY FIELD INSTALLATION

SEBP6163 (22)

243-6718 KIT-CRANKSHAFT BEARING S/N LNB1-UP; TWS1-UP PART OF 366-6114 CRANKSHAFT GP

417-1742 KIT-ENGINE GASKET S/N LNB1-UP; LZB1-UP KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES FIELD INSTALLATION

449-8561 KIT-ENGINE GASKET -REAR COVER S/N LNB1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET. FIELD INSTALLATION

469-0823 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD S/N LNB1-UP; LZB1-UP; ELM1-UP ^CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. ^KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ^**ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. ^^*

469-2905 KIT-ENGINE GASKET S/N LNB1-UP; LZB1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE FIELD INSTALLATION

499-9145 KIT-ENGINE GASKET S/N LNB1-UP OIL COOLER AND LINES FIELD INSTALLATION

547-8086 KIT-ENGINE GASKET S/N LNB1-UP SINGLE CYLINDER HEAD FIELD INSTALLATION

549-4827 KIT-ENGINE GASKET S/N LNB1-UP TURBOCHARGER FIELD INSTALLATION

499-9145 KIT-ENGINE GASKET S/N AN21-UP OIL COOLER AND LINES FIELD INSTALLATION

549-4827 KIT-ENGINE GASKET S/N ELM1-UP TURBOCHARGER FIELD INSTALLATION

417-1903 KIT-WATER PUMP S/N LNB1-UP; LZB1-UP CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES FIELD INSTALLATION

417-1903 KIT-WATER PUMP S/N AN21-UP CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES AN ATTACHMENT

248-1394 KIT-INJECTOR S/N LNB1-UP; LZB1-UP CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER FIELD INSTALLATION

368-1372 KIT-VOLTAGE REGULATOR S/N L7A1-UP; L6B1-UP PART OF 247-1815, 247-6178, 267-2502, 322-8926, 323-6296 GENERATOR GP, 327-0284, 327-0285 REGULATOR GP-VOLTAGE FOR USE WITH GS562DK, GS561DK, GS514DK, GS402DK, GS361DK, GS281DK, GS012DK, M1Z1-UP, M1Y1-UP, NKL1-UP, DKE1-UP, FFJ1-UP, C5L1-UP, 8NS1-UP

348-3295 KIT-GASKET -SINGLE CYLINDER LINER S/N LNB1-UP; LZB1-UP FIELD INSTALLATION

386-3814 KIT-GASKET S/N LNB1-UP; LZB1-UP CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAG FIELD INSTALLATION

348-3295 KIT-GASKET -SINGLE CYLINDER LINER S/N AN21-UP FIELD INSTALLATION

386-3814 KIT-GASKET S/N AN21-UP CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAG FIELD INSTALLATION

578-4199 KIT-PREVENTIVE MAINTENANCE S/N LNB1-UP 500 HOUR FIELD INSTALLATION

578-4200 KIT-PREVENTIVE MAINTENANCE S/N LNB1-UP 500 HOUR FIELD INSTALLATION

578-4201 KIT-PREVENTIVE MAINTENANCE S/N LNB1-UP 500 HOUR FIELD INSTALLATION

578-4202 KIT-PREVENTIVE MAINTENANCE S/N LNB1-UP 500 HOUR FIELD INSTALLATION

SEBP6454 (19)

416-7023 KIT-ENGINE GASKET S/N NRC1-UP; SYC1-UP; JPE1-UP; PRH1-UP KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FIELD INSTALLATION

434-7542 KIT-ENGINE GASKET S/N NRC1-UP; JAZ1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES. FOR USE WITH 343-1709, 380-1430, 380-1431, 444-7556, 444-7557, 444-7558 FIELD INSTALLATION

434-9762 KIT-ENGINE GASKET S/N NRC1-UP; JAZ1-UP FRONT STRUCTURE FIELD INSTALLATION

455-3257 KIT-ENGINE GASKET S/N JAZ1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL POL PUMP, AND BLOCK COVERS. FOR USE WITH 343-1710 FIELD INSTALLATION

459-2217 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE S/N SYC1-UP; JPE1-UP; PRH1-UP KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS FIELD INSTALLATION

461-2531 KIT-ENGINE GASKET S/N NRC1-UP; JAZ1-UP KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES FOR USE WITH 444-7556, 444-7558 AN ATTACHMENT AND FIELD INSTALLATION

492-4408 KIT-ENGINE GASKET S/N SYC1-UP; JPE1-UP; PRH1-UP CENTRAL AND LOWER STRUCTURE FIELD INSTALLATION

456-1686 KIT-FRONT COVER GASKET S/N JAZ1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET. FOR USE WITH 343-1710 FIELD INSTALLATION

455-3258 KIT-OIL COOLER & LINES GASKET S/N NRC1-UP; JAZ1-UP FIELD INSTALLATION

377-7037 KIT-WATER PUMP S/N NRC1-UP; JAZ1-UP FOR USE WITH 336-7659, 343-1709, 380-1430, 380-1431, 444-7556, 444-7557, 444-7558 FIELD INSTALLATION

248-1394 KIT-INJECTOR S/N NRC1-UP CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER FOR USE WITH 343-1710 FIELD INSTALLATION

447-3803 KIT-ELECTRONIC CONTROL S/N NRC1-UP FOR USE WITH EMCP 4.3 AN ATTACHMENT

447-3804 KIT-ELECTRONIC CONTROL -EMCP 4.4 S/N NRC1-UP AN ATTACHMENT

258-8117 KIT-GASKET -SINGLE CYLINDER LINER S/N NRC1-UP CONTAINS SEALS TO REINSTALL ONE CYLINDER LINER FOR USE WITH 343-1710 FIELD INSTALLATION

313-5974 KIT-GASKET S/N NRC1-UP; JAZ1-UP CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES FOR USE WITH 343-1710 AN ATTACHMENT AND FIELD INSTALLATION

360-4171 KIT-GASKET S/N NRC1-UP; JAZ1-UP CONTAINS GASKET SEALS AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET. FOR USE WITH 343-1710, 444-7556, 444-7557, E920- ENGINE S/N RND1-UP, RNY1-UP, E977- ENGINE S/N RNE1-UP, RNX1-UP, E996- ENGINE S/N RNR1-UP, RNZ1-UP,

433-7503 KIT-GASKET -TURBOCHARGER S/N NRC1-UP; JAZ1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE FOR USE WITH 444-7558, 444-7556, 444-7557 FIELD INSTALLATION

455-3259 KIT-GASKET S/N NRC1-UP; JAZ1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS. KIT DOES NOT INCLUDE THE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLI

492-4454 KIT-GASKET S/N SYC1-UP; JPE1-UP; PRH1-UP CENTRAL AND LOWER STRUCTURE GASKET KIT FIELD INSTALLATION

SEBP6482 (2)

374-9163 KIT-CRANKSHAFT S/N LC61-UP; E6L1-UP; E6M2716-UP PART OF 285-8930 CRANKSHAFT GP

368-1372 KIT-VOLTAGE REGULATOR S/N G5A1-UP PART OF 270-1253, 270-1254, 285-7043, 285-7044, 285-7045, 285-7046, 285-7047, 285-7048 GENERATOR GP FOR USE WITH GS562-, GS338-, GS282-, GS281-, GS279-, GS189-, N1D1-UP, EKW1-UP, C5E1-UP, C5H1-UP, C9E1-UP, B8D1-UP, REHS3668

SEBP6665 (2)

373-1057 KIT-GENERATOR REPAIR S/N G5Z1-UP FOR USE WITH 822-FRAME, 824-FRAME, 825-FRAME, 826-FRAME, 827-FRAME, 828-FRAME AN ATTACHMENT

353-5995 KIT-SEAL -SINGLE CYLINDER LINER S/N XL61-UP TO BE USED WITH ENGINES BUILT AFTER DEC 2009 FOR USE WITH 378-7743, REHS7402 FIELD INSTALLATION

SEBP7037 (14)

506-0742 KIT-ENGINE GASKET S/N SG41-UP FRONT STRUCTURE PART OF 542-9436 KIT-ENGINE OVERHAUL

541-0038 KIT-ENGINE GASKET S/N SG41-UP SINGLE CYLINDER HEAD PART OF 542-9436 KIT-ENGINE OVERHAUL FIELD INSTALLATION

541-0056 KIT-ENGINE GASKET S/N SG41-UP TURBOCHARGER FIELD INSTALLATION

541-0820 KIT-ENGINE GASKET S/N SG41-UP SINGLE CYLINDER HEAD PART OF 542-9397 KIT-ENGINE OVERHAUL FIELD INSTALLATION

541-0821 KIT-ENGINE GASKET S/N SG41-UP TURBOCHARGER FIELD INSTALLATION

542-9397 KIT-ENGINE OVERHAUL S/N SG41-UP FIELD INSTALLATION

542-9436 KIT-ENGINE OVERHAUL S/N SG41-UP FIELD INSTALLATION

520-7005 KIT-SENSOR & MOUNTING S/N SG41-UP HARNESSES 508-2175 AND 510-4350 ARE OPTIONAL BASED UPON DISTANCE OF AIR TO FUEL RATIO CONTROL FROM. ENGINE FIELD INSTALLATION

142-0404 KIT-GASKET -FRONT STRUCTURE S/N SG41-UP PART OF 542-9397 KIT-ENGINE OVERHAUL

147-5543 KIT-GASKET S/N SG41-UP KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES PART OF 542-9397, 542-9436 KIT-ENGINE OVERHAUL

208-4836 KIT-GASKET -WATER PUMP S/N SG41-UP THIS KIT IS FOR ALL 3300 ENGINES AND COME WITH ALL 3300 REMAN WATER PUMPS. THIS KIT CONTAINS THE GASKETS AND SEALS TO INSTALL THE BYPASS ELBOW AND MAIN WATER PUMP PART OF 542-9436 KIT-ENGINE OVERHAUL FIELD REPLACEMENT FOR 170-1834 KIT-GASKET, 171-3686 KIT-

297-1744 KIT-GASKET -WATER PUMP S/N SG41-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES. PART OF 542-9397 KIT-ENGINE OVERHAUL

297-3075 KIT-GASKET -CENTRAL, LOWER STRUCTURE S/N SG41-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS PART OF 542-9397, 542-9436 KIT-ENGINE OVERHAUL

6V-2982 KIT-GASKET -REAR STRUCTURE S/N SG41-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE OIL PAN GASKET PART OF 542-9397, 542-9436 KIT-ENGINE OVERHAUL FIELD INSTALLATION

SEBP7038 (7)

527-0770 KIT-ENGINE GASKET S/N PJ21-UP CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES FIELD INSTALLATION

4P-1782 KIT-BUS BAR S/N 9FG3180-UP; FYR1-UP PROVIDES CONNECTION POINT FOR POWER LEADS COMING OUT OF STATOR AS PART OF 116-9747, 116-9748, 116-9749, 116-9750, 116-9751, 116-9752, 312-0147, 312-0159, 312-0161, 314-4159, 314-4167, 481-5169 GENERATOR GP ALSO AN ATTACHMENT

4P-1799 KIT-BUS BAR S/N 9FG3180-UP PROVIDES DUAL VOLTAGE BUS BAR AS. PART OF 344-2717, 9Y-0383, 9Y-0390, 9Y-1428 GENERATOR GP

4P-1788 KIT-SPACE HEATER S/N 9FG3180-UP; FYR1-UP PART OF 116-9749, 116-9752, 312-0159, 312-0161, 314-4159, 344-2717, 481-5169, 483-7839, 9Y-1428 GENERATOR GP FOR USE WITH 590 SQUARE LAMINATION SR4B GENERATOR ALSO AN ATTACHMENT

7E-5034 KIT-RFI FILTER S/N 9FG3180-UP 240-VOLT FOR USE WITH VR3 REGULATOR AN ATTACHMENT

4P-3317 KIT-INSTALLATION -EXCITER S/N 9FG3180-UP CONTAINS STEPPED KEY AND KEY FIELD INSTALLATION

161-0080 KIT-PARTS S/N 9FG3180-UP FOR USE WITH MARINE GENSETS THAT MEET MARINE CLASS SOCIETY REQUIREMENTS AN ATTACHMENT

SEBP7039 (3)

457-4537 KIT-ENGINE GASKET S/N FPL1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FIELD INSTALLATION

377-7037 KIT-WATER PUMP S/N FPL1-UP FIELD INSTALLATION

160-9874 KIT-GASKET -SINGLE CYLINDER LINER S/N FPL1-UP FOR USE WITH PQ0863 FIELD INSTALLATION

SEBP7120 (10)

449-8561 KIT-ENGINE GASKET -REAR COVER S/N NAP1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 420-6876 FIELD INSTALLATION

456-2533 KIT-ENGINE GASKET S/N NAP1-UP ***KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES FOR USE WITH 420-6876 FIELD INSTALLATION

467-4081 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD S/N NAP1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER EN

468-8631 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE S/N NAP1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS FOR USE WITH 420-6876 FIELD INSTALLATION

469-8567 KIT-ENGINE GASKET -FRONT COVER S/N NAP1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 420-6876 FIELD INSTALLATION

469-0185 KIT-OIL COOLER & LINES GASKET S/N NAP1-UP KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES FOR USE WITH 420-6876 FIELD INSTALLATION

366-4252 KIT-EXCITER S/N NAP1-UP AN ATTACHMENT

368-1372 KIT-VOLTAGE REGULATOR S/N G6B1-UP PART OF 322-8926, 323-6296 GENERATOR GP FOR USE WITH GS562-, GS338-, GS282-, GS281-, GS279-, GS189-, N1D1-UP, EKW1-UP, C5E1-UP, C5H1-UP, C9E1-UP, B8D1-UP, REHS3668

386-3814 KIT-GASKET S/N NAP1-UP CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAG FIELD INSTALLATION

455-1180 KIT-GASKET -TURBOCHARGER S/N NAP1-UP CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP FOR USE WITH 420-6876 FIELD INSTALLATION

SEBP7121 (12)

449-6055 KIT-ENGINE GASKET -TURBOCHARGER S/N NAW1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.. KIT INCLUDES TURBO MOUNTING HARDWARE. FOR USE WITH 420-6877 FIELD INSTALLATION

449-8561 KIT-ENGINE GASKET -REAR COVER S/N NAW1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 420-6877 FIELD INSTALLATION

456-2533 KIT-ENGINE GASKET S/N NAW1-UP ***KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES FOR USE WITH 420-6877 FIELD INSTALLATION

491-3976 KIT-ENGINE GASKET S/N FST1-UP CENTRAL AND LOWER STRUCTURE GASKET KIT FOR USE WITH 420-6877 FIELD INSTALLATION

491-4042 KIT-ENGINE GASKET S/N FST1-UP OIL COOLER AND LINES GASKET KIT FOR USE WITH 420-6877 FIELD INSTALLATION

499-9145 KIT-ENGINE GASKET S/N FST1-UP OIL COOLER AND LINES FOR USE WITH 420-6877 FIELD INSTALLATION

547-8086 KIT-ENGINE GASKET S/N FST1-UP SINGLE CYLINDER HEAD FOR USE WITH 420-6877 FIELD INSTALLATION

436-6597 KIT-FRONT COVER GASKET S/N NAW1-UP KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 420-6877 FIELD INSTALLATION

366-4252 KIT-EXCITER S/N NAW1-UP AN ATTACHMENT

368-1372 KIT-VOLTAGE REGULATOR S/N G6B1-UP PART OF 322-8926, 323-6296 GENERATOR GP FOR USE WITH GS562-, GS338-, GS282-, GS281-, GS279-, GS189-, N1D1-UP, EKW1-UP, C5E1-UP, C5H1-UP, C9E1-UP, B8D1-UP, REHS3668

348-3295 KIT-GASKET -SINGLE CYLINDER LINER S/N NAW1-UP FOR USE WITH 420-6877 FIELD INSTALLATION

386-3814 KIT-GASKET S/N NAW1-UP CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAG FIELD INSTALLATION

SEBP7126 (5)

456-2533 KIT-ENGINE GASKET -WATER PUMP S/N H5G1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES FIELD INSTALLATION

248-1394 KIT-INJECTOR S/N H5G1-UP CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER. SINGLE FUEL INJECTOR FOR USE WITH E810 ENGINE S/N MXS 1-UP, TT115 ENGINE S/N LHX 1-UP, MACHINE JMS 813-3999 FIELD INSTALLATION

160-9874 KIT-GASKET -SINGLE CYLINDER LINER S/N H5G1-UP CONTAINS OIL, MID, COOL LINER SEALS & BAND FILLER. FIELD INSTALLATION

514-9020 KIT-GASKET S/N H5G1-UP CONTAINS THE GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLER(S). OIL FILTER BASE AND ATTACHING LINES FOR USE WITH 433-7761 FIELD INSTALLATION

514-9025 KIT-GASKET S/N H5G1-UP SINGLE CYLINDER HEAD FIELD INSTALLATION

SEBP7368 (8)

495-1630 KIT-ENGINE GASKET S/N K3B692-UP CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET FIELD INSTALLATION

525-1413 KIT-ENGINE GASKET S/N K3B692-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALLA CYLINDER HEAD. INCLUDES TURBO GASKETS, DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD.

364-0171 KIT-BELLOWS S/N X3F1-UP FIELD INSTALLATION

495-2741 KIT-EXHAUST -CEM S/N X3F1-UP AN ATTACHMENT

504-5930 KIT-INSULATION S/N X3F1-UP AN ATTACHMENT

332-8866 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N BGK1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH NON-3508 BASED ENGINE APPLICATIONS

333-2392 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N BGK1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH G3304, G3306, G3406, G3408, G3408C, G3412, G3412C, G3508, G3512, AND G3516 ENGINES

333-2393 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL + S/N BGK1-UP PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC FIELD REPLACEMENT FOR 133-6350 FOR USE WITH 3508 AND 3508B ENGINE APPLICATIONS

SEBP7400 (9)

450-2548 KIT-ENGINE GASKET S/N NGP1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.. KIT INCLUDES THE TURBO MOUNTING HARDWARE. FOR USE WITH 452-9865 FIELD INSTALLATION

471-6159 KIT-ENGINE GASKET S/N S9P1-UP SINGLE CYLINDER HEAD FIELD INSTALLATION

450-5708 KIT-FRONT COVER GASKET S/N NGP1-UP CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET FOR USE WITH 452-9865 FIELD INSTALLATION

448-1642 KIT-REAR COVER GASKET S/N NGP1-UP KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET. FOR USE WITH 452-9865 FIELD INSTALLATION

445-8630 KIT-OIL COOLER & LINES GASKET S/N NGP1-UP CONTAINS THE GASKETS & SEALS TO ASSEMBLE & REINSTALL THE OIL COOLER(S), OIL FILTER BASE & ATTACHING LINES FOR USE WITH 452-9865 FIELD INSTALLATION

326-1006 KIT-FUEL TRANSFER PUMP S/N S9P1-UP PART OF 476-8769 PUMP GP-UNIT INJECTOR HYD

460-3838 KIT-PLUG S/N NGP1-UP PART OF 449-0772, 449-0775 HEATER GP-JACKET WATER AN ATTACHMENT

368-1372 KIT-VOLTAGE REGULATOR S/N G5A1-UP; G6B1-UP PART OF 270-1253, 270-1254, 285-7043, 285-7044, 285-7045, 285-7046, 285-7047, 285-7048, 322-8926, 323-6296 GENERATOR GP FOR USE WITH GS562-, GS338-, GS282-, GS281-, GS279-, GS189-, N1D1-UP, EKW1-UP, C5E1-UP, C5H1-UP, C9E1-UP, B8D1-UP, REHS3668

470-6751 KIT-GASKET S/N NGP1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS FOR USE WITH 452-9865 FIELD INSTALLATION