418-0464 THUMB GP -PIN GRABBER, 6-TOOTHS/N THC1-UP

Group No: 418-0464

Part Number	Part Name	Qty
0930349	1 WASHER (22X60X6-MM THK)	1
8T7547	2 BOLT (M8X1.25X30-MM)	4
1598036	3 FILM-WARNING (READ OMM)	1
2227101	4 WASHER (71X130X3-MM THK)	2
2639600	5 SPACER	6
9M1974	6 WASHER-HARD (8.8X16X2-MM THK)	4
3134425	7 LINK AS	1
3134426	8 PIN AS	1
3843906	9 LINK AS-IDLER (RH)	1
8Y7023	9A BOSS (M12X1.75-MM)	1
1574552	9B BEARING	1
3843907	10 LINK AS-IDLER (LH)	1
8Y7023	10A BOSS (M12X1.75-MM)	1
1574552	10B BEARING	1
3843908	11 LINK AS (CENTER)	1
7Y5131	11A BUSHING	4
3843910	12 PLATE AS-STOP	2
3843911	13 PIN AS	2
3843913	14 PLATE-CAP	2
3843914	15 PIN	1
3844034	16 TUBE-RETAINER	1
3941764	17 PIN	1
3941765	18 PIN AS	1
4170226	19 CYLINDER GP-THUMB	1
4180465	20 THUMB AS	1
2C9259	20A PLATE-IDENTIFICATION (CAT)	2
1475838	20B BUSHING	2
3843956	20C CAP-RETAINER	2
3125694	21 SETSCREW (1/4-20X0.25-IN)	1
3324695	22 NUT (M8X1.25-THD)	4
3B8489	23 FITTING-GREASE (1/8-27 PTF)	9
5P8249	24 WASHER-HARD (24X41.5X4-MM THK)	2
6V7676	25 NUT (M24X3-THD)	2
6Y2266	26 PIN	2
7X0618	27 WASHER-HARD (13.5X40X5-MM THK)	2
8T4173	28 BOLT (M16X2X110-MM)	1
8T4174	29 BOLT (M16X2X120-MM)	1
8T4192	30 BOLT (M12X1.75X25-MM)	2
8T4778	31 LOCKNUT (M16X2-THD)	2
8T5460	32 BOLT (M20X2.5X40-MM)	1
8T5878	33 BOLT (M24X3X80-MM)	2
2684530	FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)	1