CYLINDER HEAD GP
16 assemblies
SEBP3735 (16)
245-4031 CYLINDER HEAD AS S/N KCB1-14117 PART OF 240-8271 CYLINDER HEAD GP
1 - 99999 308-6358 CYLINDER HEAD AS S/N KCB14118-92459 PART OF 257-4095 CYLINDER HEAD GP OPTIONAL FIELD REPLACEMENT ORDER 342-4397
1 - 99999 342-4397 CYLINDER HEAD AS FIELD REPLACEMENT FOR 308-6358 FIELD INSTALLATION
1 - 99999 345-3752 CYLINDER HEAD AS PART OF 305-0617 CYLINDER HEAD GP
1 - 99999 240-7679 CYLINDER HEAD GP S/N KCB1-14117
1 - 99999 240-7679 CYLINDER HEAD GP S/N KCB14118-UP
1 - 99999 240-8271 CYLINDER HEAD GP S/N KCB1-14117 PART OF 240-7679 CYLINDER HEAD GP
1 - 99999 257-4095 CYLINDER HEAD GP S/N KCB14118-92459 PART OF 240-7679 CYLINDER HEAD GP
1 - 99999 305-0617 CYLINDER HEAD GP PART OF 305-0618 CYLINDER HEAD GP, 10R-9921, 10R-9922 KIT-ENGINE OVERHAUL, 360-7715, 360-7716 PARTS GP-ENGINE OVERHAUL
1 - 99999 305-0618 CYLINDER HEAD GP
1 - 99999 198-4963 FASTENER GP-CYLINDER HEAD PART OF 240-7679, 305-0618 CYLINDER HEAD GP
1 - 99999 422-9389 GASKET GP-CYLINDER HEAD -SINGLE CYLINDER HEAD CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENG
1 - 99999 117-0178 PLUG GP-ENGINE -REAR CRANKSHAFT PROVIDES PLUGS FOR REAR CRANKSHAFT FLANGE WHEN ENGINE BUILT WITHOUT FLYWHEEL CANNOT BE USED WITH FLYWHEEL ALSO AN ATTACHMENT
1 - 99999 223-3873 PLUG GP-ENGINE PROVIDES PLUG WHEN NO AIR COMPRESSOR IS USED AN ATTACHMENT
1 - 99999 260-7553 PLUG GP-ENGINE -OIL COOLER PROVIDES NO. 6 PLUG FOR THE ENGINE OIL COOLER, REQUIRED WHEN A COOLANT CONDITIONER IS NOT USED FOR USE WITH 229-8613, 239-8384, 246-8836, 246-8837 CANNOT BE USED WITH 260-7552 AN ATTACHMENT
1 - 99999 307-2667 PLUG GP-ENGINE S/N KCB58165-UP FOR USE WITH BLOCK WHEN A REAR HEATER GROUP IS NOT CALLED OUT
1 - 99999