System And Components
274-1155 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT, RIPPERS/N C7G1000-UP
Group No: 274-1155
| Part Number | Part Name | Qty | |
|---|---|---|---|
| 2607268 | 1 SPACER (18X30X25-MM THK) | 2 | |
| 3W1482 | 2 SHAFT AS | 2 | |
| 8E6894 | 3 HANDLE (BULLDOZER) | 1 | |
| 8E7364 | 4 BOOT | 2 | |
| 8G4657 | 5 YOKE | 2 | |
| 8T0798 | 6 BEARING-ROLLER | 8 | |
| 0911745 | 7 WASHER (16.6X24X1.2-MM THK) | 2 | |
| 1338056 | 8 FILM-INSTRUCTION (BULLDOZER, RIPPER) | 1 | |
| 2280952 | 9 PLATE AS | 1 | |
| 2710675 | 10 SUPPORT AS | 1 | |
| 2712576 | 11 SHAFT AS | 1 | |
| 2712661 | 12 ROD AS | 1 | |
| 8X6167 | ROD END | 1 | |
| 1M1341 | END-YOKE ROD | 1 | |
| 6V8183 | NUT-FULL (3/8-24-THD) | 2 | |
| 2712663 | 13 ROD AS | 1 | |
| 8X6167 | ROD END | 1 | |
| 2K0400 | END-YOKE ROD | 1 | |
| 6V8183 | NUT-FULL (3/8-24-THD) | 2 | |
| 2712665 | 14 ROD AS | 1 | |
| 2712662 | ROD | 1 | |
| 5J5315 | ROD END | 2 | |
| 6V8183 | NUT-FULL (3/8-24-THD) | 2 | |
| 2722729 | 15 PLATE | 2 | |
| 2730405 | 16 LEVER AS | 1 | |
| 2741772 | 17 SUPPORT AS | 1 | |
| 2751866 | 18 ROD | 1 | |
| 2751867 | 19 ROD | 1 | |
| 2939677 | 20 ROD AS | 1 | |
| 4D4064 | ROD END (3/8-24-THD) | 2 | |
| 6V8183 | NUT-FULL (3/8-24-THD) | 2 | |
| 2939678 | 21 LEVER AS | 1 | |
| 2A1736 | 22 HANDLE (RIPPER) | 1 | |
| 2K4973 | 23 LOCKNUT (3/8-16-THD) | 2 | |
| 2L6267 | 24 LOCKNUT (3/8-24-THD) | 2 | |
| 3B4615 | 25 PIN-COTTER | 4 | |
| 5P8167 | 26 BOLT (3/8-16X0.625-IN) | 2 | |
| 5S7382 | 27 BOLT (3/8-16X1.375-IN) | 2 | |
| 6B1225 | 28 PIN | 2 | |
| 7X3374 | 29 NUT-FULL (1/2-20-THD) | 3 | |
| 8B1419 | 30 PIN-CLEVIS | 2 | |
| 8T0741 | 31 SEAL-LIP TYPE | 8 | |
| 8T4121 | 32 WASHER-HARD (11X21X2.5-MM THK) | 21 | |
| 8T4122 | 33 WASHER-HARD (17X32X3.5-MM THK) | 1 | |
| 8T4137 | 34 BOLT (M10X1.5X20-MM) | 1 | |
| 8T4191 | 35 BOLT (M10X1.5X16-MM) | 8 | |
| 8T4195 | 36 BOLT (M10X1.5X30-MM) | 4 | |
| 8T4196 | 37 BOLT (M10X1.5X35-MM) | 10 | |
| 8T4896 | 38 WASHER-HARD (10.2X18.5X2.5-MM THK) | 7 |