KIT-REBUILD
71 assemblies
SEBP6138 (52)
599-7281 KIT-CYLINDER HEAD GASKET S/N R1A1-UP; R2A1-UP PART OF 599-7296 KIT-ENGINE OVERHAUL FIELD INSTALLATION
1 - 99999 422-7389 KIT-ENGINE GASKET S/N R1A1-UP CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL AN EXTERNAL OIL PUMP FIELD INSTALLATION
1 - 99999 423-3551 KIT-ENGINE GASKET S/N R1A1-UP FOR USE WITH 283-1145, 283-9470 FIELD INSTALLATION
1 - 99999 423-9461 KIT-ENGINE GASKET -REAR STRUCTURE S/N R1A1-UP CONTAINS GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET. ***FLYWHEEL HOUSING GASKET PART NUMBER 7N-3049 IS NOT INCLUDED IN THIS KIT. CATERPILLAR RECOMMENDS USING LOCTITE HI-TEMP FLANGE
1 - 99999 425-9351 KIT-ENGINE GASKET -FRONT STRUCTURE S/N PLZ1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET FIELD REPLACEMENT ORDER 573-4296 FOR USE WITH 283-9472 FIELD INSTALLATION
1 - 99999 433-9305 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE S/N R1A1-UP CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS PART OF 440-0027 KIT-ENGINE OVERHAUL FOR USE WITH 262-6045, 283-1145 ALSO FIELD INSTALLATION
1 - 99999 437-8540 KIT-ENGINE GASKET -TURBOCHARGER S/N R1A1-UP CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP FIELD INSTALLATION
1 - 99999 438-9354 KIT-ENGINE GASKET -CENTRAL AND LOWER STRUCTURE S/N R2A607-UP; PLZ1-UP CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS. PART OF 440-0842, 599-7296 KIT-ENGINE OVERHAUL FOR USE WITH 283-9472 ALSO FIELD INSTALLATION
1 - 99999 438-9629 KIT-ENGINE GASKET -WATER LINES GROUP S/N R1A1-UP; PLZ1-UP CONTAINS THE GASKETS & SEALS TO INSTALL A WATER LINES GROUP. FOR USE WITH 283-9472, 283-1145 FIELD INSTALLATION
1 - 99999 499-1660 KIT-ENGINE GASKET S/N R1A1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL. THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS FOR USE WITH 283-1145 FIELD INSTALLATION
1 - 99999 572-2741 KIT-ENGINE GASKET -FRONT STRUCTURE S/N R1A1-UP PART OF 440-0027 KIT-ENGINE OVERHAUL FOR USE WITH 262-6045, 272-8252, 283-1145, 283-9470 ALSO FIELD INSTALLATION
1 - 99999 572-2746 KIT-ENGINE GASKET -FRONT STRUCTURE S/N R2A1-UP FOR USE WITH 283-9472 FIELD INSTALLATION
1 - 99999 573-4296 KIT-ENGINE GASKET -FRONT STRUCTURE S/N R2A607-UP; PLZ1-UP PART OF 440-0842, 599-7296 KIT-ENGINE OVERHAUL
1 - 99999 439-8576 KIT-ENGINE OVERHAUL -TOP END S/N R1A1-UP FOR USE WITH 283-9470, 262-6045, 283-1145, REHS8209 ALSO FIELD INSTALLATION
1 - 99999 440-0027 KIT-ENGINE OVERHAUL S/N R1A1-UP FOR USE WITH 283-9470, 262-6045, 283-1145, REHS8211 ALSO FIELD INSTALLATION
1 - 99999 440-0842 KIT-ENGINE OVERHAUL S/N R2A607-UP; PLZ1-UP FOR USE WITH 283-9472, REHS8212 ALSO FIELD INSTALLATION
1 - 99999 599-7296 KIT-ENGINE OVERHAUL -MAJOR REPAIR S/N R2A1-UP FIELD INSTALLATION
1 - 99999 423-4327 KIT-FRONT COVER GASKET S/N R1A1-UP FOR USE WITH 283-1145, 283-9470 FIELD INSTALLATION
1 - 99999 438-9575 KIT-REAR COVER GASKET S/N R1A1-UP; R2A607-UP; PLZ1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET. ***FLYWHEEL HOUSING GASKET PART NUMBER 309-4550 IS NOT INCLUDED IN THIS KIT. CATERPILLAR RECOMMENDS USING LOCTITE HI
1 - 99999 440-0841 PARTS GP-ENGINE OVERHAUL -TOP END S/N R2A607-UP; PLZ1-UP FOR USE WITH 283-9472, REHS8210 ALSO FIELD INSTALLATION
1 - 99999 423-4328 KIT-OIL COOLER & LINES GASKET S/N R1A1-UP FOR USE WITH 3512C PART OF 439-8576, 440-0027 KIT-ENGINE OVERHAUL FOR USE WITH 283-1145, 283-9470 ALSO FIELD INSTALLATION
1 - 99999 424-3497 KIT-WATER LINES GASKET S/N R1A1-UP FIELD INSTALLATION
1 - 99999 222-5152 KIT-WATER PUMP S/N R1A1-UP FIELD INSTALLATION
1 - 99999 422-7380 KIT-AFTERCOOLER GASKET S/N R1A1-UP PART OF 439-8576, 440-0027 KIT-ENGINE OVERHAUL FOR USE WITH 262-6045 ALSO FIELD INSTALLATION
1 - 99999 465-1519 KIT-EMISSION RETROFIT S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL
1 - 99999 439-0457 KIT-TURBOCHARGER GASKET S/N R1A1-UP; R2A607-UP; PLZ1-UP CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC. PART OF 439-8576, 440-0027, 440-0842, 599-7296 KIT-ENGINE OVER
1 - 99999 437-2779 KIT-FUEL SYSTEM PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH ALL RETROFIT UPGRADE CONVERSION TO BLENDED FUEL
1 - 99999 444-5686 KIT-FUEL SYSTEM PARTS S/N R1A1-UP ATAAC, CERTIFIED PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH DYNAMIC GAS BLENDING UPGRADE FOR SERIAL NUMBER PREFIX R2A
1 - 99999 445-8024 KIT-FUEL SYSTEM PARTS S/N R1A1-UP ATAAC, NON-CERTIFIED PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH DYNAMIC GAS BLENDING UPGRADE FOR SERIAL NUMBER PREFIX R2A
1 - 99999 454-0787 KIT-FUEL SYSTEM PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH ENGINES WITH INSTALLED FLAME ARRESTORS
1 - 99999 9W-1494 KIT-SERVICE METER S/N R1A1-UP PART OF 2W-9592 METER GP-SERVICE
1 - 99999 426-6084 KIT-TRANSMISSION GEAR -UPGRADE S/N FRT1-UP FOR USE WITH REHS8263 & REHS8264 FIELD INSTALLATION
1 - 99999 437-2780 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH CARBURETOR CERTIFIED SCAC ENGINE
1 - 99999 437-2781 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH CARBURETOR CERTIFIED ATAAC ENGINE
1 - 99999 437-2782 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH AIR CLEANER MOUNTING CHANGE FOR ATAAC 2250 & 2500-HP ENGINES WITH 2 AIR CLEANER BRACKETS, AIR CLEANERS 281-9212, 212-4620, & 304-4971
1 - 99999 437-2783 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH AIR CLEANER MOUNTING UPDATE FOR SCAC 2250 & 2500-HP ENGINES WITH 2 AIR CLEANER BRACKETS, AIR CLEANER 355-5542
1 - 99999 437-2784 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH AIR CLEANER MOUNTING CHANGE FOR SCAC 2250 & 2500-HP ENGINES WITH 4 AIR CLEANER BRACKETS, AIR CLEANER 369-8282
1 - 99999 437-2785 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH ENGINE WITH A INSTALLED JACKET WATER AFTERCOOLER HEATER
1 - 99999 439-7726 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH NON-CERTIFIED ATAAC ENGINE OUTSIDE OF EPA REGULATED REGIONS
1 - 99999 440-4302 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH ENGINE WITH 12-IN BELLOWS
1 - 99999 440-4303 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH ENGINE WITH INSTALLED AIR COMPRESSOR
1 - 99999 441-5264 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH NON-CERTIFIED SCAC OUTSIDE OF EPA REGULATED REGIONS
1 - 99999 445-9283 KIT-ENGINE PARTS -BLENDED FUEL S/N R1A1-UP PART OF 439-1147 CONVERSION AR-BLENDED FUEL FOR USE WITH CONVERSION TO 8.75-IN BELLOW
1 - 99999 268-8154 KIT-GASKET -SINGLE FUEL INJECTOR S/N R1A1-UP FIELD INSTALLATION
1 - 99999 304-7216 KIT-GASKET -WATER PUMP S/N R1A1-UP FOR USE WITH 283-1145, 283-9470 FIELD INSTALLATION
1 - 99999 306-2351 KIT-GASKET -WATER PUMP S/N R1A1-UP CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES FOR USE WITH 272-8252 FIELD INSTALLATION
1 - 99999 355-0776 KIT-GASKET -SINGLE CYLINDER HEAD S/N R1A1-UP; R2A607-UP; PLZ1-UP PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR EUI APPLICATIONS WITH STANDARD EXHAUST 320-8974 GASKET, AND THE LATEST VALVE BODY SEAL 240-7032. THIS KIT DOES NOT CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEA
1 - 99999 395-0373 KIT-GASKET -CENTRAL AND LOWER STRUCTURE S/N R1A1-UP CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS FOR USE WITH 321-1160 ENGINE ARRANGEMENT, E898-, E416-, E416-, E416-, E416-, E436-, E436-, E436-, E523-, E526-, E761-, E763-, E763
1 - 99999 424-2404 KIT-GASKET S/N R1A1-UP KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL AN EXTERNAL OIL PUMP. FOR USE WITH E416-, E526-, E526-, E761-, E763-, E763-, E763-, E763-, E763-, E899-, DV124-, E773-, E773-, E923- FIELD INSTALLATION
1 - 99999 438-9424 KIT-GASKET -OIL COOLER, LINES S/N R2A607-UP; PLZ1-UP CONTAINS THE GASKETS & SEALS TO ASSEMBLE & REINSTALL THE OIL COOLER(S), OIL FILTER BASE & ATTACHING LINES. PART OF 440-0842, 599-7296 KIT-ENGINE OVERHAUL, 440-0841 PARTS GP-ENGINE OVERHAUL FOR USE WITH 283-9472 ALSO FIELD INSTALLATION
1 - 99999 438-9634 KIT-GASKET -AFTERCOOLER, LINES S/N R1A1-UP; R2A607-UP; PLZ1-UP PART OF 440-0842, 599-7296 KIT-ENGINE OVERHAUL, 440-0841 PARTS GP-ENGINE OVERHAUL FOR USE WITH 283-9472, 272-8252 ALSO FIELD INSTALLATION
1 - 99999 353-5995 KIT-SEAL -SINGLE CYLINDER LINER S/N R1A1-UP FIELD INSTALLATION
1 - 99999 SEBP7410 (18)
452-9918 KIT-CYLINDER HEAD -SINGLE CYLINDER HEAD S/N 2AF1-UP FOR USE WITH 317-2440 FIELD INSTALLATION
1 - 99999 553-4180 KIT-CYLINDER HEAD S/N 2AF1-UP SINGLE CYLINDER HEAD OVERHAUL KIT FOR USE WITH 317-2440 FIELD INSTALLATION
1 - 99999 355-0772 KIT-CYLINDER HEAD GASKET S/N 2AF1-402 KIT IS BEING RELEASED TO PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR EUI APPLICATIONS WITH BELLOWS EXHAUST. (229-5332) AND THE EARLIER VALVE BODY SEAL (117-9315 SEAL). KIT DOES NOT CONTAIN INJECTOR SEALS. BREATHER SEALS, VALVE STEM SEALS, O
1 - 99999 440-0757 KIT-ENGINE GASKET -CENTRAL AND LOWER STRUCTURE S/N 2AF1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS PART OF 440-1753 PARTS GP-ENGINE OVERHAUL FOR USE WITH 173-2948 ALSO FIELD INSTALLATION
1 - 99999 440-0769 KIT-ENGINE GASKET -FRONT STRUCTURE S/N 2AF1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET PART OF 440-1753 PARTS GP-ENGINE OVERHAUL FOR USE WITH 173-2948 ALSO FIELD INSTALLATION
1 - 99999 440-0817 KIT-ENGINE GASKET -OIL COOLER, LINES S/N 2AF1-UP CONTAINS THE GASKETS & SEALS TO ASSEMBLE & REINSTALL THE OIL COOLER(S), OIL FILTER BASE & ATTACHING LINES PART OF 440-1752 KIT-ENGINE OVERHAUL, 440-1753 PARTS GP-ENGINE OVERHAUL FOR USE WITH 173-2948 ALSO FIELD INSTALLATION
1 - 99999 441-5230 KIT-ENGINE GASKET -AFTERCOOLER, LINES S/N 2AF1-UP CONTAINS THE GASKETS & SEALS TO INSTALL THE AFTERCOOLER & ATTACHING LINES. PART OF 440-1752 KIT-ENGINE OVERHAUL, 440-1753 PARTS GP-ENGINE OVERHAUL FOR USE WITH 173-2948 ALSO FIELD INSTALLATION
1 - 99999 440-1752 KIT-ENGINE OVERHAUL -TOP END S/N 2AF1-UP FOR USE WITH 173-2948, REHS8203 ALSO FIELD INSTALLATION
1 - 99999 438-9575 KIT-REAR COVER GASKET S/N 2AF1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET. ***FLYWHEEL HOUSING GASKET PART NUMBER 309-4550 IS NOT INCLUDED IN THIS KIT. CATERPILLAR RECOMMENDS USING LOCTITE HI-TEMP FLANGE SEALANT
1 - 99999 440-1753 PARTS GP-ENGINE OVERHAUL S/N 2AF1-UP MAJOR FOR USE WITH 173-2948, REHS8207 ALSO FIELD INSTALLATION
1 - 99999 222-5152 KIT-WATER PUMP S/N WF21-UP; 2AF1-UP FIELD INSTALLATION
1 - 99999 294-4935 KIT-WATER PUMP -AUXILIARY WATER PUMP S/N 2AF1-UP THIS KIT CONTAINS STRAIGHT FIT SHAFT & IMPELLER. CONTAINS THE BEARINGS, SHAFT, IMPELLER, SEALS & HARDWARE REQUIRED TO REBUILD AN AUXILIARY WATER PUMP. AN AUXILIARY WATER PUMP INSTALL KIT IS REQUIRED TO INSTALL PUMP FIELD REPLACEMENT FOR 221-9
1 - 99999 439-0457 KIT-TURBOCHARGER GASKET S/N 2AF1-UP CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC. PART OF 440-1752 KIT-ENGINE OVERHAUL, 440-1753 PARTS GP-ENGINE OVERHAUL
1 - 99999 9W-1494 KIT-SERVICE METER S/N 2AF1-UP PART OF 2W-9592 METER GP-SERVICE
1 - 99999 426-6084 KIT-TRANSMISSION GEAR -UPGRADE S/N FRT1-UP FOR USE WITH REHS8263 & REHS8264 FIELD INSTALLATION
1 - 99999 200-1886 KIT-GASKET -WATER LINES S/N 2AF1-UP KIT CONTAINS THE GASKETS AND SEALS NEEDED TO REINSTALL UPPER WATER MANIFILDS AND REGULATORS. FOR USE WITH 173-2948 FIELD INSTALLATION
1 - 99999 268-8154 KIT-GASKET -SINGLE FUEL INJECTOR S/N WF21-UP; 2AF1-UP FIELD INSTALLATION
1 - 99999 355-0773 KIT-GASKET -SINGLE CYLINDER HEAD S/N 2AF1-UP PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR EUI APPLICATIONS WITH BELLOWS EXHAUST 229-5332 GASKET, AND THE LATEST VALVE BODY SEAL 240-7032. THIS KIT DOES NOT CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUT
1 - 99999