3570351
STUD-TAPERLOCK (M10X1.5X60-MM) · (M10X1.5X60-MM)(HIGH TEMPERATURE)
17Models
50Assemblies
30Co-occurring
Part Information ▼
▼Compatible Models (17)
▼Found in Assemblies (50)
| Assembly | Model | Ref# | Qty | Note |
|---|---|---|---|---|
| 448-3588 MANIFOLD GP-EXHAUSTS/N CM81-UP · PART OF 519-4410 ENGINE AR-COMPLETE | C18 | 10 | ×4 | M |
| 343-0590 MANIFOLD GP-EXHAUSTS/N BDN1-UP · AN ATTACHMENT | CX38-P800 | 4 | ×4 | CM |
| 343-0591 MANIFOLD GP-EXHAUSTS/N BDN1-UP · HIGH MOUNT | CX38-P800 | 4 | ×4 | M |
| 343-0593 MANIFOLD GP-EXHAUSTS/N BDN1-UP · FOR USE WITH REAR FACING EXHAUST SERIES TURBO CONFIGURATION | CX38-P800 | 4 | ×4 | M |
| 488-6231 KIT-ENGINE GASKETS/N GG51-UP · SINGLE CYLINDER HEAD | C15 | ×4 | M | |
| 488-6298 KIT-ENGINE GASKETS/N GG51-UP · CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES. TURBO MOUTNING HARDWARE WILL BE INCLUDED | C15 | ×4 | M | |
| 343-0592 MANIFOLD GP-EXHAUSTS/N JJF1-UP; JJK1-UP · FOR USE WITH FRONT FACING EXHAUST APPLICATIONS | C15 | 4 | ×4 | M |
| 343-0591 MANIFOLD GP-EXHAUSTS/N RDP1-UP · HIGH MOUNT | 390F | 4 | ×4 | M |
| 448-3588 MANIFOLD GP-EXHAUSTS/N KMS1-UP · PART OF 522-3420, 522-3421, 582-4159 ENGINE AR-COMPLETE | C18 GEN SE | 10 | ×4 | M |
| 343-0591 MANIFOLD GP-EXHAUSTS/N RDP1-UP · HIGH MOUNT | 390F | 4 | ×4 | M |
| 592-7342 KIT-CYLINDER HEAD GASKETS/N CKH1-UP · AN ATTACHMENT | C18 | ×4 | M | |
| 592-7298 KIT-CYLINDER HEAD GASKETFIELD INSTALLATION | C15 | ×4 | M | |
| 468-2161 KIT-ENGINE GASKET -SINGLE CYLINDER HEADKIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE · FOR USE WITH 365-6707, 365-6711, 362-6461, SEHS0361 VISUAL INSPECTION OF LINER SEATS | C15 | ×4 | M | |
| 470-1892 KIT-ENGINE GASKET -TURBOCHARGERKIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE · FOR USE WITH 365-6707, 365-6711, 362-6461 | C15 | ×4 | M | |
| 563-2291 KIT-ENGINE GASKETS/N JRE1-UP · SINGLE CYLINDER HEAD | C15 | ×4 | M | |
| 436-5757 KIT-TURBOCHARGER GASKETCONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP · FOR USE WITH 365-6335, 365-6337 | C15 | ×4 | M | |
| 389-9575 MANIFOLD GP-EXHAUSTPART OF 480-4450, 481-4668 ENGINE AR-COMPLETE · ALSO AN ATTACHMENT | C15 | 10 | ×4 | M |
| 592-7298 KIT-CYLINDER HEAD GASKETFIELD INSTALLATION | C18 | ×4 | M | |
| 468-2161 KIT-ENGINE GASKET -SINGLE CYLINDER HEADKIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE · FOR USE WITH SEHS0361 VISUAL INSPECTION OF LINER SEATS | C18 | ×4 | M | |
| 469-0878 KIT-ENGINE GASKET -SINGLE CYLINDER HEADKIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE · FOR USE WITH 347-0532, 366-5507, SEHS0361 VISUAL INSPECTION OF LINER SEATS | C18 | ×4 | M | |
| 470-1892 KIT-ENGINE GASKET -TURBOCHARGERKIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE · FIELD INSTALLATION | C18 | ×4 | M | |
| 436-5757 KIT-TURBOCHARGER GASKETCONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP · FOR USE WITH 366-5507 | C18 | ×4 | M | |
| 389-9575 MANIFOLD GP-EXHAUST | C18 | 10 | ×4 | M |
| 592-7342 KIT-CYLINDER HEAD GASKETAN ATTACHMENT | C18 | ×4 | M | |
| 353-7165 MANIFOLD GP-EXHAUSTALSO AN ATTACHMENT | C13 | 4 | ×4 | M |
| 592-7342 KIT-CYLINDER HEAD GASKETS/N MGS1-UP · AN ATTACHMENT | C18 | ×4 | M | |
| 592-7342 KIT-CYLINDER HEAD GASKETAN ATTACHMENT | C18 | ×4 | M | |
| 592-7342 KIT-CYLINDER HEAD GASKETAN ATTACHMENT | C18 | ×4 | M | |
| 343-0590 MANIFOLD GP-EXHAUSTS/N BDN1-UP · AN ATTACHMENT | CX35-C18I | 4 | ×4 | CM |
| 343-0591 MANIFOLD GP-EXHAUSTS/N BDN1-UP · HIGH MOUNT | CX35-C18I | 4 | ×4 | M |
| 343-0593 MANIFOLD GP-EXHAUSTS/N PCF1-UP; BDN1-UP · PART OF 391-7188, 434-7974 ENGINE AR-COMPLETE | CX35-C18I | 4 | ×4 | M |
| 343-0593 MANIFOLD GP-EXHAUSTS/N PCF1-UP; BDN1-UP · PART OF 391-7188, 434-7974, 444-9664 ENGINE AR-COMPLETE | CX35-C18I | 4 | ×4 | M |
| 488-6231 KIT-ENGINE GASKETS/N JJF1-UP · SINGLE CYLINDER HEAD | C15 | ×4 | M | |
| 488-6298 KIT-ENGINE GASKETS/N X5M1-UP · CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES. TURBO MOUTNING HARDWARE WILL BE INCLUDED | C15 | ×4 | M | |
| 343-0592 MANIFOLD GP-EXHAUSTS/N JJF1-UP · FOR USE WITH FRONT FACING EXHAUST APPLICATIONS | C15 | 4 | ×4 | M |
| 592-7298 KIT-CYLINDER HEAD GASKETS/N JRE1-UP · FIELD INSTALLATION | TH35-C15I | ×4 | M | |
| 468-2161 KIT-ENGINE GASKET -SINGLE CYLINDER HEADS/N JRE1-UP · KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE | TH35-C15I | ×4 | M | |
| 470-1892 KIT-ENGINE GASKET -TURBOCHARGERS/N JRE1-UP · KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE | TH35-C15I | ×4 | M | |
| 563-2291 KIT-ENGINE GASKETS/N JRE1-UP · SINGLE CYLINDER HEAD | TH35-C15I | ×4 | M | |
| 436-5757 KIT-TURBOCHARGER GASKETS/N JRE1-UP · CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP | TH35-C15I | ×4 | M | |
| 389-9575 MANIFOLD GP-EXHAUSTS/N JRE1-UP · ALSO AN ATTACHMENT | TH35-C15I | 10 | ×4 | M |
| 353-7165 MANIFOLD GP-EXHAUSTS/N LGK1-UP · AN ATTACHMENT | TH35-C13I | 4 | ×4 | M |
| 488-6231 KIT-ENGINE GASKETS/N JJF1-UP · SINGLE CYLINDER HEAD | C15 | ×4 | M | |
| 488-6298 KIT-ENGINE GASKETS/N T4A1-UP · CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES. TURBO MOUTNING HARDWARE WILL BE INCLUDED | C15 | ×4 | M | |
| 343-0592 MANIFOLD GP-EXHAUSTS/N JJF1-UP · FOR USE WITH FRONT FACING EXHAUST APPLICATIONS | C15 | 4 | ×4 | M |
| 353-7165 MANIFOLD GP-EXHAUSTS/N RRA1-UP; LGK1-UP · ALSO AN ATTACHMENT | CX31-C13I | 4 | ×4 | M |
| 592-7298 KIT-CYLINDER HEAD GASKETS/N JRE1-UP; MCW1-UP · FIELD INSTALLATION | CX31-C15I | ×4 | M | |
| 468-2161 KIT-ENGINE GASKET -SINGLE CYLINDER HEADS/N JRE1-UP; MCW1-UP · KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE | CX31-C15I | ×4 | M | |
| 470-1892 KIT-ENGINE GASKET -TURBOCHARGERS/N JRE1-UP; MCW1-UP · KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE | CX31-C15I | ×4 | M | |
| 563-2291 KIT-ENGINE GASKETS/N JRE1-UP · SINGLE CYLINDER HEAD | CX31-C15I | ×4 | M |